​
top of page
logo_eu.9ac04f85.png
LSSE-logo-main.png

 >>  PRODUCTS  >>  INTUMESCENT WRAPS  >>  MULTITUBE  >>  INSTALLATION

1 - rigid wall thickness B = min. 150 mm
2 - plastic pipe, diameter "D" and pipe wall thickness "t"
3 - Multitube fireproof tape (inside), dimensions [hxs], placed
  centrally  inside the wall
4 - electrically clamped band or adhesive tape
5 - the gap between the pipe and the partition with a maximum width of 25 mm,  filled  
  cement mortar or mineral wool with a density of min. 5 0 kg / m3 and closed
  gypsum mortar with a thickness of min. 5 mm

1 - reinforced concrete floor, thickness B = min. 150 mm
2 - plastic pipe, diameter "D" and pipe wall thickness "t"
3 - Multitube fireproof tape (inside) [hxs] mm, placed at the distance
  l = 15 ± 5 mm  from the underside of the floor
4 - electrically clamped band or adhesive tape
5 - the gap between the pipe and the partition, width u = max. 25 mm, filled
  cement mortar

* Detailed information can be found at ETA

Refer to the Table below for the length of the Multitube fireproof tape for the given pipe diameter. Then measure it out and cut it off with a knife
Wrap the cut piece of the tape around the pipe. Strictly stick to the number of wraps given in Table below
Secure the Multitube fireproof tape with a electrically clamped band or adhesive tape and slide it inside the partition. Location of the tape inside the opening - central position along the wall axis or 15 ± 5 mm from the bottom of the floor
Fill the space between the pipe and the partition with cement mortar
Mark the completed penetration seal with the attached label, mark the Multitube fireproof intumescent tape on it,
enter the date and name

TABLE FOR SELECTING THE LENGTH AND NUMBER OF WRAPS OF MULTITUBE FIREPROOF  INTUMESCENT TAPE FOR PVC PIPES WITHOUT INSULATION

TABLE FOR SELECTING THE LENGTH AND NUMBER OF WRAPS OF MULTITUBE FIREPROOF  INTUMESCENT TAPE FOR PE-HD, PE, PP, ABS, SAN + PVC WITHOUT INSULATION

TABLE FOR SELECTING THE LENGTH AND NUMBER OF WRAPS OF MULTITUBE FIREPROOF  INTUMESCENT TAPE FOR PP PIPES WITHOUT INSULATION

METHOD OF SEALING A PLASTIC PIPE WITHOUT INSULATION IN WALL AND FLOOR ACCORDING TO ETA-15/0511*

INSTALLATION OF MULTITUBE FIREPROOF INTUMESCENT TAPE ON A PLASTIC PIPE WITHOUT INSULATION PENETRATING WALL OR FLOOR

bottom of page