​
top of page
logo_eu.9ac04f85.png
LSSE-logo-main.png

 >>  PRODUCTS  >>  FIREPROOF MASSES AND PASTES  >>  FLAME CABEL A PASTE  >>  APPLICATION

1 - rigid floor with a thickness of B ≥ 150 mm and density ≥ 1700 kg / m3
2 - mineral wool with a density of not less than 120 kg / m3 
3 - fireproof paste Flame Cabel A Paste, thickness t1 ≥ 0.6 mm, t2 ≥ 1.2 mm
4 - rigid wall, thickness B ≥ 150 mm and density ≥ 600 kg / m3 
The symbol indicates the side of the partition exposed to fire

* Detailed information can be found at ETA

Apply fireproof Flame Cabel A Paste on both sides (the layer thickness is given in the technical drawing above) to the mineral wool board with a minimum density of 80 kg / m3 (board thickness should be half of the expansion joint depth) using a spatula

Place the prepared mineral wool boards inside the gap at one of its edges

On the inside of the gap, apply the fireproof Flame Cabel A Paste on the inside of the mineral wool boards with a spatula (thickness of the layer is given in the technical drawing above)

Fill the remaining gap with 80 kg / m3 mineral wool boards with previously applied Flame Cabel A Paste, the same as in step 1

The view of a properly sealed expansion joint

METHOD OF SEALING EXPANSION JOINT IN FLOOR ACCORDING TO ETA-15/0853*

APPLICATION OF FIREPROOF PASTE FLAME CABEL A PASTE ON EXPANSION JOINTS IN FLOOR

bottom of page