​
top of page

 >>  PRODUCTS  >>  FIREPROOF GASKETS  >>  GASKETS

FIREPROOF GASKETS

FIREPROOF INTUMESCENT GASKETS FOR DOORS AND WINDOWS

PRODUCT OFFICIAL DOCUMENTS​

​

  • European Declaration of Performance: CARBO/0013-07-11-2019

PRODUCT TECHNICAL DATA

  • Fire resistance class: up to EI 60

  • Reaction to fire: B-s2, d0

  • Color: dark graphite or on request

  • Density: 1.41 ± 10%

  • Storage temperature range: from + 5°C to + 35°C

  • Maximum application temperature: from + 5°C to + 35°C

  • Intumescent pressure (N/mm2): 0.45 to 0.65 (depending on type)

  • Intumescent factor (fold): from 15 to 30 (depending on the need)

  • Shelf life: no limit, recommended no longer than 24 months

  • Packaging: 10m - 100m roll

​

​

  • NEW IN THE OFFER

Fireproof intumescent gasket is made of a mixture of polymers and fillers that cause the gasket to intumesce under fire conditions. By increasing its volume many times, it prevents the spread of fire through the fire door in which it is installed.

Fireproof intumescent gasket is designed to make fireproof door seals. It is used for sealing rebates in leaves and frames, both wooden, aluminum and steel single and double fire doors. It can also be used on uneven surfaces, as well as under decorative strips. The gasket is completely resistant to water, does not peel or delaminate, and is very difficult to break after assembly. Fireproof intumescent gasket is pressed in a matrix, which gives it a very precise and unchanging geometric dimensions and high surface quality. In order to facilitate installation, fireproof intumescent gaskets can be equipped with a self-adhesive tape. Selling in rolls of various lengths allows to minimize waste. The intumescent height and pressure of fireproof gasket were tested at the Building Research Institute in accordance with the test method EOTA TR024: 2006 am: 2009.

​

Fireproof intumescent gaskets are one of the most effective ways to separate a room in the event of a fire. In contact with high temperature, fire-resistant gaskets intumesce immediately, filling all gaps, thus preventing hot air and smoke from passing through and effectively suppressing raging flames. The material increases its volume many times, tightly filling the entire surface. Fireproof intumescent gaskets available in our assortment are made of high-quality plastic and are available in many color versions, thanks to which properly selected will not disturb the aesthetics. A series of tests and studies have been carried out to confirm the effectiveness of the offered products.

Fireproof intumescent gasket is installed around the door, in a previously milled place. 3M double-sided adhesive tape ensures a stable connection with the glued element. Tape should be fitted into the slot of the prepared cutter and then stick it around the protected door.

 

ATTENTION:

Install gaskets with glue on well-cleaned and degreased surfaces - in the case of painted surfaces, paints may react with the adhesive, e.g. non-chemically hardened paints or polyvinyl paints. It is therefore necessary to check the quality by sticking a sample of the gasket to the painted surface and observe the reactions for two days. Use professional metal rollers for sticking. It is recommended to wear gloves.

GASKET DIMENSION TABLE

Intended use:

Technical description:

Technical description
Przeznaczenie

Installation:

Zastosowanie
bottom of page