top of page

 >>  PRODUCTS  >>  FIREPROOF MASSES AND PASTES  >>  FLAME CABEL A PASTE  >>  APPLICATION

1 - flexible or rigid wall with a thickness of min. 100 mm
2 - metal pipe, diameter "D" and pipe wall thickness "t"
3 - mineral wool with a density of min. 80 kg / m3 and thickness g = 30 mm
  (continuous insulation)
4 - the space between the pipe and the partition structure, max.
    a = 30 mm, filled with mineral wool with a density of min. 50 kg / m3
5 - gypsum mortar with a thickness of min. g1 = 5 mm
6 - fireproof paste Flame Cabel A Paste, dimensions: b = min. 50 mm and h = min.
  0.6 mm  (on the pipe insulation); c = min. 50 mm and h1 = min. 0.6 mm (ring on
  wall around the penetration seal)

1 - rigid wall with a thickness of min. 100 mm
2 - metal pipe, diameter "D" and pipe wall thickness "t"
3 - mineral wool with a density of min. 80 kg / m3 and thickness g = 30 mm
   (continuous insulation)
4 - the space between the pipe and the partition structure, max. a =
   30 mm, filled with mineral wool with a density of min. 50 kg / m3
5 - gypsum mortar with a thickness of min. g1 = 5 mm
6 - fireproof paste Flame Cabel A Paste, dimensions: b = min. 50 mm and h =
   min. 0.6  mm (on the pipe insulation); c = min. 50 mm and h1 = min. 0.6 mm (ring on
   wall around the penetration seal)

* Detailed information can be found at ETA

Fill the space between the pipe insulation and the partition tightly. Use mineral wool with a density of min. 60 kg / m3

Using a spatula, apply Flame Cabel A Paste on the partition in such a way that a ring with a width of min. 50 mm and a thickness of min. 0.6 mm is created